Skip to main content

FV Decipher Support

All the topics, resources needed for FV Decipher.

 
FocusVision Knowledge Base

Verifying Exit Link Functionality

Once you've finished building your survey and set up your sample sources, you'll want to test that the exit links are functioning correctly (i.e., passing the correct data).

To do this, open the survey testing environment and choose "Show Survey with Tools." Then test using the following 3 methods:

1.  Click on "Quick Links," hover-over "Test" and select "Project Summary." In the "Exit Links" section, check the exit links listed against the exit links provided by the client or Account Manager.
2.  Run through the survey with the correct link variables for a terminate and a complete and verify that you are being routed to the correct end page.
3.  Remove the link variables from the survey link and test to see if you can enter the survey without them. You should not be able to.